Your current position：Main>>Service>>Parameter
|
| |
Mesh
As a unit indicating the dimensions of mesh ，it indicates
the number of mesh within a lineal distance of 1 inch(25.4mm).
In case it is not recognizable due to smaliness of mesh ，use
a magnifying glass for
measurement.
|
 |
|
| |
Wire
It is shown as the thickness of wire itself ，or by the number
of the wire gauge list. Unless sepcifically designated ，B.W.G
shall apply when it is thicker then #3O, and S.W.G when thinner.
|
 |
|
| |
Opening
The distance
between the inside surfaces of adjacent parallel wire and
the opening is calculated by the following formula.
Opening(mm)=25.4(mm)÷mesh - wire dia(mm)
|
 |
|
| |
Open
area
Gives
the percentage of open area in a standard wire mesh.
Opening(mm) 2
Open Area(%)=（———————————）x 100
Opening(mm)+ Wire dia(mm)
|
 |
|
｜
